Fast, Reliable Gate Repair Across Tigard
Gate repair in Tigard typically costs $180–$650 depending on whether you’re dealing with corroded hinges on a cedar swing gate or a racked post on a Bull Mountain slope job, and most repairs are completed same-day. We’re David Martinez and our Gate Repair crew — 14 years fixing gates exclusively, not fences, not garage doors, just gates. From the valley-floor tract homes off Hall Boulevard to the hillside builds on Bull Mountain, we know the difference between a gate that needs a hinge swap and one that needs a full post replacement because we’ve diagnosed both in person, on the ground, in Tigard’s rain.
Call (855) 275-6878 for a free estimate. David answers the phone and shows up with the tools.
Why Liberty Bell Gate Repair Washington Is Tigard’s Preferred Gate Repair Company
We’ve earned 869 verified reviews averaging 4.7 stars, and a solid chunk of those come from repeat calls in Washington County — homeowners who tried a general handyman first, then called us when the gate dragged again three months later. David Martinez diagnoses every job himself. No dispatchers. No rotating subs. The same person quoting your repair is the one with 14 years of gate-specific experience swinging the wrench.
Our response time to Tigard runs same-day or next-morning, depending on whether you’re dealing with a security gate stuck open or a sagging backyard gate that’s more annoyance than emergency. We carry parts for FAAC, BFT, Linear, and Viking systems on the truck, so we’re not ordering components and making you wait through another week of drizzle.
What separates us in Tigard specifically: we understand HOA covenants. We’ve worked in Summerfield, Greenway Park, and the Bull Mountain subdivisions where the architectural committee has final say on gate materials and finishes. We document our repairs with photos and material specs that help homeowners get fast approval — because a gate that doesn’t match the covenant is a gate that gets rejected and redone.
Our Gate Repair Services in Tigard
Hinge Repair
Tigard’s 36-plus inches of annual rainfall turns basic galvanized hinges into orange, seized lumps within two or three seasons. We see this constantly in the 1980s-era subdivisions off Scholls Ferry Road and Hall Boulevard, where original hardware was never meant to last four decades. A typical hinge repair in Tigard runs $180–$320: we remove the corroded bracket, assess whether the wood post face is still solid, and install hot-dipped galvanized or stainless strap hinges that actually survive the wet. If the screw holes are stripped out from rust expansion, we’ll drill and through-bolt rather than pretend a longer screw fixes anything.
Post Repair
This is the big one in Tigard. Cedar posts rot at the soil line — it’s not a question of if, it’s a question of when, given decades of saturation. In Greenway Park and similar HOA communities, we’ve replaced dozens of posts where the base turned to punk wood and the gate pulled six inches away from the latch. Post repair in Tigard typically runs $280–$480 for a single cedar replacement with proper drainage gravel and concrete footing below the frost line. We set posts plumb and allow for seasonal ground movement, because Tigard’s mild freeze-thaw cycles in the Tualatin Valley will heave anything shallow-set within a year.
Weld Repair
Ornamental iron gates on Bull Mountain and the newer high-end builds need structural welding when cracks develop at stress points — usually where a picket meets the frame or where the gate attaches to a steel post. We weld in place when possible, or remove the gate to our shop for frame repair if the damage is extensive. Weld repair in Tigard runs $240–$550 depending on access and whether we need to match an existing powder-coat finish for HOA compliance.
Gate Realignment
Here’s where local knowledge pays off. On Bull Mountain’s sloped lots — developments from the late 1990s and 2000s — gates must be racked to follow the grade, not hung square to plumb posts. Contractors who frame square end up with a gap that drags by the second wet season as the wood swells. We’ve fixed this exact scenario multiple times. Realignment in Tigard runs $200–$380 for adjustment and hardware replacement, or $450–$650 if we need to rehang a gate that was never properly racked to begin with. We always ask about lot grade before quoting any Bull Mountain job. It’s that common.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tigard
We work on the brand you already have — no push to replace a functioning system just because we don’t stock parts for it. David is factory-familiar with nine major gate systems, and for Tigard customers we regularly service FAAC, BFT, Linear, and Viking motors and openers. We carry common failure parts on the truck: control boards, limit switches, gear assemblies, and safety loop sensors. That means a dead LiftMaster gate opener on a Bull Mountain driveway doesn’t have to mean a week of manually dragging a heavy iron gate in the rain. Most motor repairs in Tigard run $320–$580, and we can usually source same-day or next-day for less common components.
Common Gate Repair Problems We See in Tigard Homes
- Cedar post rot at the soil line. Decades of Pacific Northwest rainfall saturate wood below grade, and the original posts in Tigard’s 1970s–2000s subdivisions weren’t pressure-treated to modern standards. The gate leans, the latch misses, and eventually the post snaps at ground level.
- Galvanized hardware corrosion. Basic hinges and latches from the original build turn orange and seize, stripping screw heads and making adjustment impossible. We’ve extracted screw fragments from cedar posts in Summerfield and Greenway Park more times than we can count.
- Seasonal swelling and binding. Weeks of continuous drizzle from October through May keep cedar gates saturated. Frames swell until they bind against posts or latches, and homeowners assume the gate is “settling” when it’s actually just wet.
- Improperly racked gates on sloped lots. Bull Mountain’s hillside subdivisions require gates angled to follow the grade. Square-framed gates develop a dragging corner that abrades wood and misaligns the latch within one wet season — a mistake we see from contractors who don’t ask about slope before building.
Pricing for Gate Repair in Tigard, OR
We’re upfront about numbers because nothing erodes trust faster than a vague “we’ll see when we get there.” Here’s what gate repair costs in Tigard’s market:
| Service | Typical Range |
|---|---|
| Hinge repair/replacement | $180 – $320 |
| Post repair (single cedar) | $280 – $480 |
| Gate realignment | $200 – $380 |
| Structural weld repair | $240 – $550 |
| Lock/latch replacement | $150 – $280 |
| Rust treatment + hardware | $180 – $350 |
| Motor/opener repair | $320 – $580 |
What moves you up or down within these ranges: accessibility (steep Bull Mountain driveways take longer), HOA material requirements (matching existing cedar grade and stain), and whether we’re fixing original 1980s hardware or a failed retrofit from a previous contractor. Every estimate is free. Call (855) 275-6878 and David will walk you through what you’re actually looking at.
We Also Serve Cities Near Tigard
We run regular routes through Garden Home-Whitford, Beaverton, Cedar Hills, and Raleigh Hills — same response times, same truck stock, same David on the job. If you’re on the border between Tigard and Beaverton off Scholls Ferry Road or near the Raleigh Hills line, we’ll quote based on your location, not your ZIP code.
Serving Tigard, OR — Our Local Coverage Area
We’re based in the Tigard area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs — Gate Repair in Tigard
Yes — most Tigard HOAs, including Summerfield, require architectural committee approval for any material or finish change to visible gates. We document our repairs with photos and material specs that match your covenant requirements, and we’ve helped Summerfield homeowners get same-week approval for identical-material replacements. Call (855) 275-6878 and we’ll review your HOA docs with you before we start.
Often yes — if the posts are still plumb and solid, the dragging is usually from a gate that was never properly racked to your slope, or from swollen cedar in wet seasons. We can rehang with proper grade angle and add adjustable hinges that let you tweak seasonally. If the posts are heaved or rotted, we’ll tell you straight and quote replacement. Call (855) 275-6878 for a free assessment.
Tigard’s 36-plus inches of annual rainfall keeps soil around posts saturated for months, and if the concrete footing was poured flush to grade without drainage gravel, water pools at the base. We set replacement posts with gravel drainage below concrete and use pressure-treated cedar rated for ground contact — the original 1980s posts in many subdivisions weren’t. Proper installation makes the difference between five years and fifteen.
Yes — we service and repair LiftMaster systems, and we carry common control boards, limit switches, and gear assemblies on our truck. If your opener is more than 12–15 years old and has failed multiple times, we’ll give you honest numbers on repair versus replacement. Most LiftMaster repairs in Tigard run $320–$480. Call (855) 275-6878 with your model number.
Hot-dipped galvanized strap hinges outperform basic zinc-coated hardware by a wide margin, and stainless steel lasts longest if your budget allows. We avoid the thin, stamped hinges sold at big-box stores — they’re rated for interior use and fail within two Tigard winters. A proper hinge upgrade runs $180–$320 installed and pays for itself in years of not replacing corroded hardware annually.
Written by David Martinez, Owner & Lead Technician at Liberty Bell Gate Repair Washington, serving Tigard and Washington County with 14 years of gate-specific expertise.